The Dräger BiliLux phototherapy light

LED phototherapy system for the treatment of neonatal hyperbilirubinemia. Phototherapy is effectively used for treating neonatal unconjugated hyperbilirubinemia. The BiliLux phototherapy light has its irradiance peaks in the most effective wavelength range to reduce the bilirubin which is 460 –490nm.

Description

LED phototherapy system for the treatment of neonatal hyperbilirubinemia.

Phototherapy is effectively used for treating neonatal unconjugated hyperbilirubinemia. The BiliLux phototherapy light has its irradiance peaks in the most effective wavelength range to reduce the bilirubin which is 460 –490nm.

The irradiance can be dimmed in 5 steps to provide proper therapy for the individual patient. The phototherapy light features a large surface area to cover full term and premature babies. The irradiance is evenly distributed over the entire mattress to help ensure effective phototherapy.

The BiliLux also features a white observation light to observe the baby between phototherapy sessions or to switch white light on during phototherapy to soften blue light.

The optional BiliLux Radiometer is specifically designed for the phototherapy light and instantly measures the irradiance. Use of the radiometer helps ensure the correct positioning of the baby under the phototherapy light and the adequate irradiance that the baby receives. In addition, each measurement (incl. date and time) and the phototherapy duration can be stored and downloaded in a phototherapy report.

Light shield curtain helps to block the light of the phototherapy during phototherapy treatments to protect caregivers, other patients and parents from the blue light. Flaps at the front and back allow for easy access to the patient.

Phototherapy mask Eyemax 2 – the latex-free Eyemax 2 provides optimum comfort and protection for patients during phototherapy treatments.

The BiliLux phototherapy light was designed for flexible use and seamless integration into the neonatal workplace.

You can start and set up the BiliLux:

  • on the incubator hood,
  • on the optional spring arm,
  • on the optional trolley.

BiliLux phototherapy light

The BiliLux phototherapy light can be placed directly on an incubator hood. It has slip-resistant feet on the bottom that help to hold it in place. The phototherapy light houses the 20 blue lights that provide therapy as well as two white lights used for observation or soften the blue light. The front panel has a display screen and keys to control functions and change settings. The BiliLux phototherapy light also has the capability to produce a phototherapy report via export to a USB flash drive that is supplied with the device.

BiliLux with optional spring arm

The BiliLux with spring arm consists of the phototherapy light, an adjustable spring arm, and mounting provision that allow the BiliLux to be used with various Dräger warming therapy devices and ceiling supply units. When mounted on the arm, the phototherapy light can be rotated and positioned for optimum effectiveness. It can be easily attached and released from the spring arm by using the quick-connect mechanism.

BiliLux with optional trolley

The BiliLux with trolley consists of the phototherapy light, an adjustable spring arm, and a rolling trolley that allows use above an incubator, radiant warmer, crib, or bassinet. The trolley has four locking castors and a height-adjustable pole. These features, together with the adjustable spring arm, allow the BiliLux to be moved, rotated, and positioned for optimum effectiveness. The phototherapy light can be easily attached and released from the spring arm by using the quick-connect mechanism.

Additional information

Пік опромінення в ефективному спектрі

Між 460-490 нм

Регулювання потужності випромінювання

Так

Площа опромінюваної поверхні

50 x 30 см

Інтенсивність опромінення

На відстані 50 см не менше 30 мкВт/см²/нм

Таймер для терапії

Так

Передача даних

В IT-мережу клініки за протоколом Medibus Х

Експорт даних на USB-флешку

Так

Біле світло для спостереження

Так

Інтеграції в ОРІТН

Так

Brand

Dräger

Dräger — німецький виробник медичної та безпекової техніки, відомий рішеннями для лікарень і критичної медицини. Бренд фокусується на практичних технологіях, які допомагають медичним командам працювати стабільно, точно та безпечно в щоденних і високоризикових сценаріях. Рік заснування: 1889 Країна: Німеччина Офіційний сайт: https://www.draeger.com/ Соціальні мережі: LinkedIn | Facebook | Instagram | YouTube

Dräger — бренд із Німеччини з історією понад століття. Компанія працює з 1889 року та пройшла шлях від інженерних розробок до масштабного виробництва медичних систем, які використовують у лікарнях у багатьох країнах світу. У медичному напрямку Dräger асоціюється з надійністю обладнання, продуманістю інтерфейсів та увагою до сценаріїв, у яких важлива кожна секунда — від операційної до відділення інтенсивної терапії.

Асортимент медичної продукції Dräger охоплює базові потреби стаціонару та критичної допомоги. Це рішення для анестезіології та операційних (анестезіологічні робочі місця й системи), апарати штучної вентиляції легень для різних клінічних ситуацій, системи моніторингу пацієнта та суміжні рішення для організації безперервного контролю показників. Окремий напрям — неонатальні рішення, зокрема обладнання для підтримки стабільного середовища й догляду за новонародженими, що критично для відділень, де значення мають точні налаштування та прогнозована робота техніки.

Придбати продукцію Dräger в DM Project зручно, коли потрібен швидкий і зрозумілий підбір під задачу відділення та комплектація в одному місці. Тут легше узгодити потрібні позиції між собою, уникнути помилок сумісності та отримати рішення, яке коректно закриває реальний клінічний сценарій, а не просто “окремий пристрій у вакуумі”.

Обирайте Dräger у каталозі DM Project — щоб отримати перевірені медичні рішення з логічною комплектацією та прозорим шляхом від вибору до покупки.

Reviews

There are no reviews yet.

Be the first to review “The Dräger BiliLux phototherapy light”

Your email address will not be published. Required fields are marked *